Collection: 14mm Ash Catchers

Remove your bong's bowl and measure the ground-glass joint using a ruler or digital caliper. A standard 14mm female joint typically has a nominal opening of approximately 14.5mm, while a male joint is measured across its outside diameter.

If your bong has a 14mm female joint, you'll generally need a 14mm male ash catcher to connect directly. Be sure to check the ash catcher's upper connection as well, since your bowl must fit that opening separately.

If you're unsure whether your bong uses a 14mm or 18mm ash catcher, measuring the joint is more reliable than estimating based on the bong's overall size.

A 14mm ash catcher with a 45-degree joint is often a practical choice for beaker bongs with angled downstems. However, not every beaker uses the same joint angle, so verify your bong's connection before purchasing.

If your priority is collecting ash with minimal additional maintenance, consider a 14mm dry ash catcher. For additional water diffusion, explore percolated designs such as honeycomb, showerhead, or tree perc ash catchers.

Also consider the attachment's weight and clearance. A compact, lightweight ash catcher may be better suited to smaller beaker bongs than a large, multi-chamber design.

The difference between 45-degree and 90-degree 14mm ash catchers is the orientation of their connecting joints.

A 14mm 45-degree ash catcher is generally designed for angled bong connections, commonly found on beaker-style water pipes. A 14mm 90-degree ash catcher is intended for compatible horizontal connections, often found on straight-tube bongs.

Choose the angle that allows the ash catcher's chamber to remain upright when installed. Matching the 14mm joint size alone does not guarantee the correct fit.

A 14mm dry ash catcher collects loose ash and debris without requiring water. Its simpler chamber design helps reduce buildup inside your bong without adding another water-filled component.

A 14mm percolated ash catcher uses water and a built-in percolator for additional smoke diffusion. Common designs include honeycomb, showerhead, and tree percs, each using a different arrangement of openings to move smoke through water.

Dry ash catchers are convenient for straightforward debris collection, while percolated models offer additional diffusion at the cost of more cleaning and maintenance.

Typically, not directly. Most standard 14mm ash catchers have a 14mm female upper connection designed to accommodate a 14mm male bowl. An 18mm male bowl is too large to fit that opening.

However, you can use an 18mm bowl with a 14mm ash catcher by adding a compatible 14mm male-to-18mm female joint adapter. The adapter inserts into the ash catcher's 14mm female connection and provides an 18mm female opening for your bowl.

Before purchasing, verify both joint sizes and genders. An adapter may also add height to your setup, so check that your bong has enough clearance for the additional glass attachment.

Not automatically. Although two products may both be labeled 14mm, they must also have compatible joint genders and angles.

For example, a bong with a 14mm female joint typically requires an ash catcher with a 14mm male lower connection. The ash catcher's angle should match the bong's joint orientation so the chamber sits upright.

You should also consider the attachment's height and weight. Larger glass ash catchers can affect a smaller bong's stability or interfere with nearby glass components.

Before ordering, verify the joint size, joint gender, joint angle, and available clearance to find a compatible 14mm glass ash catcher.